Scale rib stitching method
I tried different methods and tapes but the best solution was to cut my own laser strips. The cloth used is SIG Koverall, very easy to work and bond with nitro-lacquer. Stretch the cotton yarn to the double-sided tape and cut thin 5mm wide strips Fix the strips with double tape over the rib. For […]
How to make scale engine cowl
Apply a primmer layer and then a layer of paint . Finish the surface and make the details. After finishing the polystyrene, cover the surface with epoxy resin and fiberglass. Fills the space with extruded polystyrene and then gives a rough form. Cut the plywood frames and then glue them to form the cowl base.
Pitts Special S-2A 1/4 – RC scale – scratchbuild
I built this beautiful Pitts using Airbone Magazine plans at 1/4 scale with small changes to be more realistic. The construction was mixed, made of balsa wood, fiberglass and wood structure. Model is covered with SIG Koverall and painted with bicomponent paint. The first engine was 26cc MVVS, then I changed to OS 33GT and […]